- All stainless design
- Control by means of pressure sensor, evaluating units and displays
- Individual solution based on designed technological project
The whirlpool is a vertikal welded cylindrical closed vessel with conical cap.
It has a flat bottom from the centre to borders slightly sloping (elevation in the centre 8 - 10 mm due to size of whirlpool).
On the bottom circumference there is a sloping groove, width 100 mm and depth at outlet 170 mm.
On the opposite side the groove has depth 30 mm.
A part of the whirlpool is an inlet socket (situated tangentionally), upper discharge of wort and sludge, lower inlet of washing water, collector and discharge of condensate from boiler, pressure sensor, manhole, lighting body, ladder, upper washing sphere and sanitary sphere.
All parts, touching the wort are produced of stainless steel, grade 1.4301.
Bottom of whirlpool is produced of material, thickness 6 mm.
Cylindrical part and cone are produced of material, thickness 4 mm.
Bottom stiffeners and supporting ring are of material grade 11.
Boiler unit of whirlpool is produced of material grade 1.4301, thickness 2 mm with stack cover.