Russia Plant of Capacitive Equipment, LLC

Hot water is used for the preparation of the mash, spent grains washing, boiling the wort, technical needs (washing equipment and KEG). For this purpose, the hot water unit is supplied including the heated water from the heat exchanger. The tank is insulated with polyurethane foam and lined with an external stainless steel shell. In the manufacture of stainless steel is used food grade AISI-304 with a high degree of polishing.

This container is an insulated tank for the storage of chilled glycol. It acts as a cold storage. Cold refrigerant is used for cooling the wort during pumping through a heat exchanger and cooling by circulating a CCT in the cooling jacket. The shape of the tank can be any. If the client does not have other wishes, it is executed in the form of a barrel with a hatch.

Mash filtration apparatus - a container with a stirring device. Blade mixer device provides intensive and at the same time gentle mixing of the mash. Actuator, located at the top, by a motor with worm gear, is connected via a control panel. To seal the shaft used mechanical seal gum, which does not require maintenance. Equipped with illumination and viewing window.

The filter feature - separation of the spent grain from the mash. For these purposes, the slit serves as a sieve, on which is deposited a pellet. After the precipitated pellet as wort is pumped through a filter using a vacuum pumping station. Pumping wort through the precipitated pellet is performed several times until satisfied with the brewer wort purity.

Capacity for yeast ( drozhzhanki ) are provided for storing the yeast between the fermentation period.

Provided with a cooling jacket, temperature probe. Connected to the controller. Able to ask the yeast in the flow. These stainless steel containers have dimensions calculated ones responsible for the number of recordable once yeast. For yeast health special requirements, so that the container produced in accordance with hygienic standards.

Aerator for aerating wort contains artificial disposed within the conduit supplying wort at its straight portion and communicating with the air channel, the air spray from sintered elements in the form of sleeves, and means preventing the possibility of penetration of the wort into the channel when the air supply termination (SPVPS).