Armaturenwerk Hötensleben GmbH

AWH angle type strainers are intended for use in pipelines, for coarse cleaning and filtration of liquid flows for the food, chemical and pharmaceutical industry as well as for low-germ processes. They are suitable for use in processing low-viscosity flowing media like water, steam, liquid foods and drinks with high hygienic requirements. Main features of the AWH angle type strainers: - direction of flow is from the outside to the inside - slotted tube results in low flow resistance - up to 75% higher flow cross section - flexible slot widths from 50 µm to 4 mm possible - the slot width can be easily adjusted to specific requirements by replacing the slotted strainer tubes - robust strainer element results in high pressure resistance - secure nut fastenings with leakage/relief bore - the strainer can be emptied and cleaned by removing the slotted tube. The scraper ring cleans the strainer automatically. For complex processes, we also offer completely piped strainer combinations which facilitate interruption-free operation of one strainer each.

The AWH compact intermediate flange butterfly valve in a new hygienic design is available in manual and pneumatically actuated variants. The intermediate flange version is the ideal solution for mechanical engineering. The valve boasts ease of service and a compact size. All flanges are fastened flush with each other and ensureeasy cleaning, both inside and out. The interior contains our tried and tested hygienic butterfly valve fastened tothe valve housing with two flanges sealed by O-rings. Most screws and threads are in the housing and protected from external soiling. The new AWH retaining bracket makes assembly easy and precise, even in hard-to-reach places.

The VPureMix® magnetic mixers were specially designed for applications with the most stringent demands in terms of safety and sterility. A magnetic coupling eliminates the risks of conventional shaft penetration, such as leakage and contamination, and thus guarantees the highest level of product safety. The optional magnetic field sensor also contributes to increasing process reliability, since the speed and direction of rotation can be continuously monitored, recorded and adjusted.

The pig - as clean as the pipeline itself. Safe discharging of Pipelines Use your product to the last drop and finalize your production the way it begins - with a free pipeline. Gain high-quality product from your pipeline and reduce the cleaning effort for economic production. With the product recovery technology of AWH you can process your valuable product almost entirely. The pig shoves the last drop for processing out of the pipeline. You gain an enormous saving potential for the subsequent cleaning process. You save product and reduce the cleaning effort significantly. Merely a thin residue film is left in the pipeline and the pipe's surface is accessible for short and effective CIP cleaning.

The design-protected TANKO® MX125 is a medium driven jet cleaner with constant rotation. The device is used in a wide range of industrial applications where containers and tanks need to be power-cleaned. Because of its compact design, the TANKO® MX125 can be inserted into containers through openings of 125 mm or more. The 360° spray pattern cleaning is based on 4 nozzles. The device has slide bearings and epicyclic gearing. It was designed to produce the best cleaning results. It is self-cleaning, works with high impact and still has impressively low consumption figures.